317062 — Shield Anchors

   Shield anchor shield only is assembled by three segment heavy duty steel shields, a steel cap, a strong spring and a conical nut. When tightening, the conical nut is pulling into the anchor body and make the shields expand to generate balanced expansion force in three directions in the hole wall drilled in the base materials to ensure security of installation and usage.

   Shield anchors are sutiable for medium-heavy installation loading purpose. The strong retaining force could be removed very easily after being installed. As one kind of heavy duty concrete shield anchor, The shields are made of carbon steel plate and produced by high speed automatic punching machine to ensure its high quality product performance. Expanding shield anchors are widely used for anchoring and fixing the objects in various structure substrate.

Product Features:

★ Quick and easy to install and use.

★ Easily to complete with loose bolt, projecting bolt, stud, eye bolt and hook bolt for installing purpose.

★ Simply assemble finished product without special tools.

★ If being loose or fall scattered, could reassemble or replace a spring to be restored.

★ Generate three directions balanced expansion force provide optimal loading and ensure security of installing.

★ Being suitable for medium-heavy duty loading purpose.

Materials & Surface treatment: 

● Carton steel & Zinc plating and Zinc plated and yellow passivated.

Base Materials:  ☑Concrete ☑Masonry ☑Brickwork ☑Solid wall ☑Stone

Applications:

♥Special door industry,Wall panel.

♥Installation of signs, handrails, railings, shelves and gates.

♥Installation of grating and fence and heavy machinery installing.

♥Pipe installation engineering / pipe support.

♥Cable and tower racks.

♥Installation of starter bars for structural expansion and rectification works.

♥Structural expansion and rectification works.

♥Curtain walls, cladding and precast concrete components.

Installation Instruction:

1). Drill a hole in the base material to ensure the correct diameter and embedment depth.

2). Use a nylon brush or high pressure air pump to remove all debris and dust.

3). Insert shield anchor only into the drilled hole until being flush with the substrate surface.

4). Pass a fastener through a guide hole in the fixture and vertically aligned with and close to a substrate hole.

5). To tighten by tool until be fixed fully.

Product size description: (mm/inch)

Item Code	Anchor Size	Anchor Length	Drill Dia.
3PA06	M6 (1/4)	45	12
3PA08	M8 (5/16)	50	14
3PA10	M10 (3/8)	60	16
3PA12	M12 (1/2)	75	20
3PA16	M16 (5/8)	115	25
3PA20	M20 (3/4)	130	32

**Being available to assemble loose bolt, stud, projecting bolt, eye bolt and hook bolt.