3342094 — Shield Anchor Hook Bolt

   The steel three segment shields possess strong loading and tensile strength in the pre-drilled hole in the substrate, being also suitable for enlarged hole caused by drilling in weak base materials. By pulling down the cone nut, a strong spring ensure shield anchors return to normal assembled state when the improper expansion happened during the installation. By loosing the tightened fasteners, shield anchor bolts are easily removed after being installed.

   Shield anchor hook bolt is assembled the bent hook bolt with shield anchor only. The hook bolt is bent and made by punching machine, which is different manufacturing engineering with hook bolt forged. When fastening hook bolt and making a cone nut pull into and expand masonry shield anchor to generate balanced expansion force in three directions in the hole wall drilled in the base materials to ensure security of installation and usage.

    Shield anchor hook bolts are sutiable for medium-heavy installation purpose. It is one kind of expanding shield anchor, The three segment shields are made of carbon steel plate and produced by high speed automatic punching machine to ensure its high quality product performance. Steel shield anchor with hook bolts are widely used to anchor & fix, hang or connect the objects in various structure substrate.

Product Features:

▲ Pre-assembled with bent hook bolt & Din 934 hex nut & Din 125/9021 flat washer.

▲ If being loose or fall scattered, could reassemble or replace a spring to be restored.

▲ Generate three directions balanced expansion force provide optimal loading and ensure security of installing.

▲ Used to anchor & fix, hang or connect the objects.

▲ Being suitable for medium-heavy duty loading purpose and weak base materials.

Materials & Surface treatment: 

 ☞ Carton steel & Zinc plating and Zinc plated and yellow passivated.

Base Materials:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone

Applications:

✔Special door industry,Wall panel.

✔Installation of signs, handrails, railings, shelves and gates.

✔Installation of grating and fence and heavy machinery installing.

✔Pipe installation engineering / pipe support.

✔Cable and tower racks, cable wire installation industry.

✔Installation of starter bars for structural expansion and rectification works.

✔Structural expansion and rectification works.

✔Curtain walls, cladding and precast concrete components.

Installation Guide:

❶ Drill a hole in the base materials at right angle, diameter and depth.

❷ Clean the hole inside using a brush or air pump before installing.

❸ Reorganize anchor body to the natural state and hammer the head to insert it into the drilled hole until the flat washer tightly touch with the substrate surface.

❹ Turn the folded hook clockwise by proper tool and make body expand and fix fully for direct use purpose.

+Or, drive anchor body to pass through a guide hole in the fixture and insert into the drilled hole until the flat washer tightly touch with the fixture surface.

❺ Fasten hex nut by tool until be fixed fully.

Product size description: (mm/inch)

Item Code	Anchor Size	Anchor Length	Drill Dia.	Normal Hook Bolt Size
3PAH06	M6 (1/4)	45	12	M6 X 50
3PAH08	M8 (5/16)	50	14	M8 X 55
3PAH10	M10 (3/8)	60	16	M10 X 70
3PAH12	M12 (1/2)	75	20	M12 X 85
3PAH16	M16 (5/8)	115	25	M16 X 125
3PAH20	M20 (3/4)	130	32	M20 X 140

** The special hook bolt sizes are available.

** Being available to assemble loose bolt, stud, projecting bolt, eye bolt and hook bolt.