316753 — Projection Bolt Shield Anchor

   Fix bolt shield anchor projecting bolt is specially designed to generate expansion force by a projecting bolt, instead of a conical nut inserted, to tighten and make projecting bolt be pulled into expanding shield anchor body and expand to generate balanced expansion force in four directions in the hole pre-drilled in the substrate to install the fixtures.

  Projection bolt shield anchor is pre-assembled heavy duty fix bolt shield anchor only with a projecting bolt. The end of projecting bolt is designed conical square shape, it fully closes together four segment shield and expands entirely to cause heavy duty expansion force for installing. The steel heavy-duty four segment shields structure design has strong loading and good tensile strength in drilled hole wall, which is also suitable for large holes caused by strong drilling in weak base materials. The anti-rust function of steel shields are much enhanced to make blackening phosphating surface treatment.

   Shield anchor projecting bolt is sutiable for medium-heavy installation loading purpose. The strong retaining force could be removed very easily after being installed. As one kind of concrete expansion anchors, The four segment shields are made of carbon steel plate and produced by high speed automatic punching machine. Projecting bolt shield anchors are widely being used to anchor and fix the objects in various structure substrate.

Product Features:

■ Pre-assembled with projecting bolt & Din 934 hex nut & Din 125/9021 flat washer.

■ Blackening phosphating treatment of the shields enhance anti-rust function.

■ Fix bolt anchor with shields without a conical nut inserted.

■ If being loose or fall scattered, could reassemble or replace a spring to be restored.

■ Generate four directions balanced expansion force provide optimal loading and ensure security of installing.

■ Being suitable for medium-heavy duty loading purpose and weak base materials.

Materials & Surface treatment: 

 ☞ Carton steel & Blackening phosphating and Zinc plating and Yellow passivated.

Substrate:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone

Applications:

★ Special door industry,Wall panel.

★ Installation of signs, handrails, railings, shelves and gates.

★ Installation of grating and fence and heavy machinery installing.

★ Pipe installation engineering / pipe support.

★ Cable and tower racks.

★ Installation of starter bars for structural expansion and rectification works.

★ Structural expansion and rectification works.

★ Curtain walls, cladding and precast concrete components.

Installation Procedures:

1]. Drill a hole in the substrate to ensure the correct diameter and embedment depth.

2]. Use a nylon brush or high pressure air pump to clean all debris and dust inside the hole.

3]. Loosen and remove hex nut and flat washer.

4]. Insert projection bolt shield anchor into the drilled hole until anchor head being flush with the hole surface.

5]. Pass projecting bolt head through a guide hole in the fixture and vertically aligned with and close to a hole in substrate.

6]. Re-assemble flat washer and hex nut onto the projection bolt to clamp the fixture.

7]. To tighten the hex nut of projecting bolt by tool until be fixed fully.

Product size description: (mm/inch)

Item Code	Anchor Size	Anchor Length	Drill Dia.	Normal Projecting Bolt Size
4PAP06	M6 (1/4)	40	12	M6 X 50
4PAP08	M8 (5/16)	50	14	M8 X 60
4PAP10	M10 (3/8)	60	16	M10 X 75
4PAP12	M12 (1/2)	80	20	M12 X 95

** The special projecting bot sizes are available.

** Being available to assemble loose bolt, stud, projecting bolt, eye bolt and hook bolt.