3342506 — Eyebolt Expanding Shield Anchor

    M6 Eyebolt expanding shield anchor is assembled M6 forged eyebolt with M6 expansion shield anchor only. The steel eyebolt is made from forged steel by forging process to form a closed eye, which is different with the cold folded eye bolt. The forged eye has stronger loading advantage and prevent being opened out when loading to ensure security.

    When installing, just to turn forged eye head clockwise or tighten the hex nut and make a conical nut pull into and expand shield only body to generate balanced expansion force in three directions in the hole wall drilled in the base materials to ensure security of installation and usage.

Confirm the specified hole diameter and depth for the selected model; an oversized hole requires project-specific review. By pulling down the conical nut, a strong spring ensure shield anchor bolt return to normal assembled state when the improper expansion happened during the installation. By loosing the tightened fasteners, shield anchor only are easily removed after being installed.

    Shield anchor eyebolt forged is sutiable for medium-heavy installation purpose. As one kind of eye bolt expansion anchor, Eye bolt forged eye shield anchors are widely used to anchor & fix, hang, connect or pass the objects through the eye in various structure substrate.

Product Features:

▲ Pre-assembled with M6 forged steel eyebolt & Din 934 hex nut & Din 125/9021 flat washer.

▲ Made from forged steel by forging process to form a closed eye with stronger loading advantage than the cold folded eye bolt.

▲ To tighten eyebolt, by turning eye head clockwise or fastening the hex nut assembled.

▲ If being loose or fall scattered, could reassemble or replace a spring to be restored.

▲ Generate three directions balanced expansion force provide optimal loading and ensure security of installing.

▲ Used to anchor & fix, hang, connect or pass the objects through the forged eye head.

Materials & Surface treatment: 

 ☞ Carton steel & Zinc plating and Zinc plated and yellow passivated.

Substrate:   ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone

Applications:

✔ Cables and tower racks, cable wire installation industry.

✔ Special door industry,Wall panel.

✔ Installation of signs, handrails, railings, shelves and gates.

✔ Installation of grating and fence and heavy machinery installing.

✔ Pipe installation engineering / pipe support.

✔ Installation of starter bars for structural expansion and rectification works.

✔ Structural expansion and rectification works.

✔ Curtain walls, cladding and precast concrete components.

Installation Instruction:

❶ Drill a hole in the base materials at right angle, diameter and depth.

❷ Clean the hole inside using a brush or air pump before installing.

❸ Reorganize anchor body to the natural state and hammer the head to insert it into the drilled hole until the flat washer tightly touch with the substrate surface.

❹ Turn M6 forged eye clockwise by proper tool and make body expand and fix fully for direct use purpose.

+Or, drive anchor body to pass through a guide hole in the fixture and insert into the drilled hole until the flat washer tightly touch with the fixture surface.

❺ Fasten hex nut by tool until be fixed fully.

Product size description: ( mm )

Eyebolt Size	Internal Dia.	External Dia.	Total length	Thread Length
M6 X 93	15.0 - 15.3	28 - 30	92 - 95	53 - 55
Item Code	Shield Anchor	Anchor Length	Drill Dia.	Hex Nut / Washer
3PAFEM6	M6	45	12	M6 / M6

** The special forged eyebolt sizes are available.

** The folded and welded eyebolt are available.

** Being available to assemble loose bolt, stud, projecting bolt, eye bolt and hook bolt.